Hidden parts checked
We inspect the exposed roof before covering it with new membrane and materials.
Several faults tackled once
Renewal deals with widespread ageing instead of chasing each new leak.
Consistent finished covering
We rebuild the visible roof and its junctions as one coordinated system.
When patching no longer makes sense
One broken tile does not mean you need a new roof. Repeated leaks, widespread covering failure and ageing across several roof parts are different. In those cases, paying for one local repair after another can leave the main cause untouched. We inspect the whole roof before recommending a full roof replacement in Cardiff. If renewal is the practical choice, we remove the old tiles or slates and expose the structure beneath. This lets us check for deterioration that could not be seen from outside. We then renew the underlay and battens where required before laying the chosen covering and rebuilding the roof's weatherproof finish.
One coordinated rebuild from eaves to ridge
Replacing the roof as one project lets us deal with worn materials in the right order. We complete ridges, verges, valleys, flashing and other junctions as part of the new external system rather than leaving weak details behind. A typical full up-and-over re-roof takes around two to three days. More complex shapes, restricted access, structural defects or detailed chimney junctions can extend that programme. Before work starts, we consider the covering material, roof weight, access and exposed condition so that the scope matches the property rather than a standard checklist.
Frequently asked questions
How do we know if the whole roof needs replacing?
We look at the spread and age of the defects, not one damp mark in isolation. Widespread cracked coverings, recurring leaks, weak battens or tired underlay can make full renewal more practical than a series of small repairs.
Will every full replacement take two to three days?
No. Two to three days is typical for a straightforward full up-and-over re-roof. Roof size, shape, access, weather, chimney details and defects found after stripping can all affect the working programme.
What happens after the old covering comes off?
We inspect the exposed structure and identify any defective areas. We then fit the required underlay and battens, lay the selected covering and complete ridges, verges and weatherproof junctions.